Products >
Firefly generally uses the following products in a system designed for the Wood pellet industry:
DETECTION
EXTINGUISHING
CONTROL
GD
The GD 400 detector can be used for monitoring pneumatic conveyer systems and chutes. For protection of risk zones where material occurs in dust clouds, e.g. filters. This detector recognises sparks, hot particles and flames from 400°C (752°F).
Water Spray nozzle
Water nozzle of full cone type. This nozzles capacity is 90 litres/minute and it has a 110° spraying angle at 6 bar.
CUE
Each protection zone is controlled by a control unit type CUE. The CUE has a self-diagnostic function, battery backup, flexibility and is user friendly.
TD
The TD 250 detector can be used for monitoring pneumatic conveyer systems and chutes. For protection of risk zones where material occurs in layers (e.g. storage silos) and also where material has fairly low ignition temperature. This detector recognises sparks, hot particles and flames from 250°C (482°F).
Water Mist nozzle
This water nozzle sprays fine water particles. Its capacity is 10 litres/minute and it has a 180° spraying angle at 6 bar.
MUE
It is possible to connect several control units type CUE to one master unit type MUE. The MUE is used to present information centrally. The MUE has a self-diagnostic function, battery backup, flexibility and is user- friendly.
FD
The FD detector is designed for flame detection in enclosed volumes.
Water Mist nozzle
This water nozzle sprays fine water particles. Its capacity is 9 litres/minute and it has a 180° spraying angle at 6 bar.
PlantView
Firefly is proud to present PlantView in combination with the master unit type MUE. PlantView uses SCADA (Supervisory Control And Data Acquisition) technique and provides you with a graphical overview of your process. In case of alarm, you will quickly be able to view where the problem is located and act accordingly.
PlantView - the perfect overview of your process!
EN
SV
ES
RU
中文
PT
DE
FR
IT
DK
FI